You are not logged in.

Announcement

Due to heavy spamming of forums registration is going in stages. If you wish to register as a new user with ArchBang Forums, first register and then send an e-mail to: archbangforums at gmail dot com. It should contain the problem you want to discuss or some other AB related content. You will be promoted from registering member with no posting rights to new member with posting rights after that. If your mail is ignored you haven't fulfilled the requirements.

Pages: 1

#1 2012-01-05 13:12:43

webbp
New member
Registered: 2012-01-05
Posts: 3

Error booting from 11/2011 LiveCD [Solved]

After I select "Boot ArchBang Linux" or "Boot ArchBang Linux [Xorg autodetect]", I get something like "ERROR: '/dev/disk/by-name/archbang ..." and a ramfs prompt. The "system" is a Pentium III 256 MB RAM. Suggestions?

Thanks,
Webb

Offline

#2 2012-01-05 14:28:56

pablokal
Administrator
From: Nijmegen, Holland
Registered: 2010-10-12
Posts: 2,664
Website

Re: Error booting from 11/2011 LiveCD [Solved]

Have you tested the liveCD on another pc to see if it is a valid burn?

Getting your questions answered here at ArchBang Forums
Please! Always give hardware info, if there is a chance that 's relevant: #lspci -vnn
Quote: What I have learnt from Linux is to minimize dependencies and functionalities for greater independence.
On Arch(bang) and Openbox: http://stillstup.blogspot.com/

Offline

#3 2012-01-06 07:29:08

webbp
New member
Registered: 2012-01-05
Posts: 3

Re: Error booting from 11/2011 LiveCD [Solved]

Yes, the LiveCD works perfectly on a slightly newer machine. Looks real nice, too smile

lubuntu 11.10 installs fine from CD...

Here is the exact error:


ERROR: '/dev/disk/by-label/ARCHBANG' device did not show up after 30 seconds...
   Falling back to interactive prompt
   You can try to fix the problem manually, log out when you are finished
sh: can't access tty; job control turned off
[ramfs /]#


Thanks,
Webb

Offline

#4 2012-01-06 10:22:24

ArchVortex
Retired AB Overlord
From: Jakarta, Indonesia
Registered: 2011-04-01
Posts: 1,449

Re: Error booting from 11/2011 LiveCD [Solved]

Sounds like the /dev/archiso wasn't created.

At [ramfs /]# try this:

[ramfs /]#  cd /dev
[ramfs /]#  ln -s sr0 archiso
[ramfs /]#  exit

and see if it will boot now.

GUI's?? We don't need no stinkin' GUI's!!!

Offline

#5 2012-01-07 15:26:01

webbp
New member
Registered: 2012-01-05
Posts: 3

Re: Error booting from 11/2011 LiveCD [Solved]

[ramfs /]#  cd /dev
[ramfs /]#  ln -s sr0 archiso
[ramfs /]#  exit

Nope same error.

Offline

#6 2012-02-06 11:18:04

imk
New member
Registered: 2012-02-06
Posts: 3

Re: Error booting from 11/2011 LiveCD [Solved]

I am also facing same Problem...
I've created live usb by unetbootin ...
It showing same msg.... Plz help us...
I'm using P-4 (2.4 GHz) sys with 512 ram...

Offline

#7 2012-02-06 12:40:42

Mr Green
Iso Developer
Registered: 2010-11-07
Posts: 3,893

Re: Error booting from 11/2011 LiveCD [Solved]

Are you using unetbootin under Windows? if not why not try dd method

dd if=archbang<date><arch>.iso of=/dev/sdXx bs=8M

.:Armchair Linux Blog:. Minirc Rocks!!!

Offline

#8 2012-02-07 02:17:41

imk
New member
Registered: 2012-02-06
Posts: 3

Re: Error booting from 11/2011 LiveCD [Solved]

thanx its working...

Last edited by imk (2012-02-07 02:24:06)

Offline

#9 2012-02-07 07:59:55

oliver
Administrator
Registered: 2010-11-04
Posts: 1,544

Re: Error booting from 11/2011 LiveCD [Solved]

I assume it's working after you tried Mr Green's 'dd' suggestion?  If so, can you confirm so it's clear for future users?

Hasta manana, monsieur
Were the only words that I knew for sure

Offline

#10 2012-02-07 08:02:27

Mr Green
Iso Developer
Registered: 2010-11-07
Posts: 3,893

Re: Error booting from 11/2011 LiveCD [Solved]

oopps marked as solved may have jumped the gun

.:Armchair Linux Blog:. Minirc Rocks!!!

Offline

Pages: 1

Board footer

Powered by FluxBB